2024-01-15
Where to start repairing Leybold oil-sealed rotary vane pumps?-EUREKA
What are the reasons why the vacuum pump cannot pump air: 1. The sealing gasket is aging and the sealing performance is deteriorated; 2. The vacuum degree is insufficient; 3. The shaft seal is hardened, which affects the sealing effect. This affects the slow pumping of the vacuum pump.
Detail
2024-01-12
Leybold WSU3001-EUREKA
The Leybold sealed motor Roots pump WS/WSU series adds a new member, WSU3001, to the original members WS/WSU251, WS/WSU501, WS/WSU1001, and WS/WSU2001. WSU 3001 further increases the pumping speed of the WS/WSU series standard pumps. The integrated frequency conversion design makes the structure more compact and easier to install. It is suitable for some short-time evacuation and other common industrial applications, giving you one more choice.
Detail
2024-01-11
How to start repairing Aifake oil-sealed rotary vane pump?-EUREKA
Aifake vacuum pump is a common equipment commonly used in industrial production. Long-term operation of Aifake vacuum pump will cause the wear of the iron parts of the vacuum pump and the aging of the seals, resulting in insufficient vacuum, oil leakage, and high temperature in the Edward vacuum pump. If abnormal noise occurs, the vacuum pump needs to be repaired.
Detail
2024-01-02
Leybold SV630B vacuum pump repair (SV630B end cover)-EURUKA
Leybold SV630B has a pumping capacity of 640m3/h at a frequency of 50Hz. It is a single-stage oil-sealed rotary vane pump with a considerable pumping capacity. It is mainly used in the coating industry. The pump itself is equipped with an anti-backflow valve, gas ballast, exhaust filter, oil return pipeline, oil cooling circuit and thermal protection switch. The pump is driven by a fixed base electric motor via four V-belts.
Detail
2023-12-29
How to use vacuum pump oil correctly-EUREKA
The window containing oil must be clean. Exposure to the sun and storage in the open air are strictly prohibited. It should be stored in a dark, dry and ventilated place to prevent moisture and dust from being mixed in.
Detail