News

The team at Eureka has prepared an application guide to guide you through preventive maintenance. This guide will help you determine when your pump should be repaired. If necessary, please visit the Eureka Service Department for repairs! Phone: 86+17820632283

Preventive Maintenance

Preventive maintenance for vacuum pumps is the process of making periodic adjustments and repairs to the equipment to keep it running optimally.

Preventive maintenance services for vacuum pumps may include:

- Oil changes

- Bearing inspection

- Leak testing

- Filter replacement and cleaning

- Seal kit replacement, etc.

These preventative measures help keep your equipment running properly and save you from costly repairs and production downtime in the future. Taking care of your equipment will help extend the life of your product and prevent it from serious breakdowns.

Reduce Unplanned Downtime

Preventive maintenance identifies future service problems with your vacuum pump so you can fix them before an unexpected failure leads to unplanned downtime. Identifying service problems ahead of time allows you to plan when your equipment will be serviced so you can schedule downtime.

Maintain Vacuum Pump Performance

Protect the efficiency and accuracy of your vacuum pump.

With preventive maintenance and regular tune-ups, your pump should run more accurately and efficiently. Regular maintenance keeps your machine running to the specifications you started with. Without preventive maintenance, your equipment will take longer to reach the same pressure levels that were previously easily and quickly achieved.

Lower repair costs

Serious breakdowns are less likely to occur when wear parts are replaced regularly.

When your vacuum pump runs for a period of time, parts usually wear out and need to be replaced. Replacing parts before failure occurs will prevent the component from being completely damaged and leading to more complicated repairs.

Repair

How to know when you need to repair your vacuum pump. Repair is different from preventive maintenance because without preventive maintenance, the unit would need to be repaired because something inside the machine is broken and malfunctioning. Here are some of the conditions that may indicate that your pump needs repair.

Condition Performance

- If your pump is not reaching its ultimate pressure level or downtime criteria

- If the pump is not pumping a certain volume at all or is taking a long time to do so

- Is the pressure high compared to the pump's specification sheet

If your pump shows any signs of under-performance, it could mean that your pump needs servicing.

Oil leaks

If you notice that your vacuum pump is leaking oil, it could indicate that the seals in the system are worn and need to be replaced or repaired.

Vacuum leaks in the pump

Vacuum leaks are holes in the system that allow gas to enter or exit the pump. Weakened seals and o-rings can cause leaks within the system.

Knocking Sounds

Knocks, clicks, hisses, and unrecognizable unusual noises may indicate that your machine needs service.

Excessive Vibration

If the pump vibrates excessively when it is turned on, it may indicate that there is some problem in your unit that requires service.

Pump does not rotate

If the pump does not rotate, the motor may be damaged or larger debris may have gotten in, causing the rotor to bite and seize up

Complete lack of routine maintenance

If the vacuum pump has never had any preventive maintenance since it was first used, it's time to have it repaired.

Schedule regular preventive maintenance before repairs are needed

It's critical to keep up with regular maintenance so that your problems don't turn into costly and timely repairs. The Eureka team has experienced, factory-trained technicians with the specialized knowledge your equipment needs.

Eureka performs minor and major repairs on all makes and models of dry and wet vacuum pumps, including seal/gasket replacements, bearing rotor replacements, oil changes, oil mist filter replacements, cleaning, vacuum testing and integrity testing.

Need a vacuum pump repair? Please contact us with any questions you may have via the following methods!

Leave a message via the website http://www.eureka-vac.com

Tel：+86 17820632283 Mr. Su 

WeChat: 17820632283

Email:sales@eurekasz.com

Whatspp:+8617820632283

Eureka team can also provide remote technical support!